One cable instalation
Ways to connect multiple cameras on one cable (outdoor and recessed use)
(Outdoor and Recessed Application)
1. PoE adapter
Device description: The PoE adapter allows us to power and transfer data from two cameras at the same time. Requires connection to two PoE posts.
Connection description: The adapter consists of two parts, the first part is plugged into the Switch PoE, the second part is connected to the cameras. Adapters can be used on a regular LAN Switch/Router, but then the camera will need a separate DC12V power supply. Attention! Unfortunately, PoE Adapters do not work with PoE Recorders.
2. Switch ATTE XPOE-3-11
Device description: The ATTE XPOE-3-11 switch allows you to power and transfer data via one internet cable to up to two cameras. It requires only one PoE port on the Switch to operate. The device works with PoE Switches and PoE Recorders.
Connection description: Using a twisted pair cable, connect the device to the LAN1+PoE IN connector and the PoE connector in the switch. Connect the cameras to the LAN2+POE OUT and LAN3+POE OUT connectors using an Internet cable.
3. Switch ATTE IPB-5-10-S4
Device description: Switch ATTE IPB-5-10-S4 allows you to send data to the Router using one twisted pair, the device has 5 PoE ports and one LAN port. It allows for direct connection of up to 5 PoE cameras. The switch is fully hermetic, which allows for outdoor installation. ATTENTION! The device requires a 220V power supply.
Connection description: Using a twisted pair cable, connect the device to the Router and the LAN_6 connector on the Switch. The cameras should be connected to free PoE connectors. Finally, the Switch should be connected directly to the 220V power supply.
4. Switch ATTE XPOE-4-10-HS
Device description: Switch ATTE XPOE-4-10-HS allows you to connect up to three cameras on one internet cable. It only requires one PoE port to operate. Works with PoE Switches and PoE Recorders.
Connection description: Using the twisted-pair cable, use the PoE power source with the LAN_1+PoE_IN connector. Cameras should be connected to the remaining PoE ports.
There are many other devices on the market that allow you to connect cameras on one cable. The devices listed above are in our offer.
